Stiprintuvas 100V Bluetooth Denon Pro DN200AZB

DENON PRO DN-200AZB

Denon Professional's Solution Series is designed to be the best friend of audio contractors. It's specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.

 

The DN-200AZB is a compact Bluetooth® audio receiver with a built-in 20W RMS, 4-ohm, 70/100V Class D amplifier. It lets you add an amp with wireless stereo Bluetooth audio reception to any professional audio system. Once you pair your Bluetooth device to DN-200AZB, you can send your device’s audio signal to your loudspeakers, powered by the DN-200AZB.

 

Funkcijos

Bluetooth level control

4-ohm, 70/100V, 20W RMS Amplifier

Euroblock speaker output

Euroblock line input

Utilizes Bluetooth CSR 4.0 

Pakuotėje

DN-200AZB

Removable bluetooth antenna

(1) 3-pin Euroblock connector

(1) 4-pin Euroblock connector

15VDC Power adapter

User guide

Safety and warranty manual 

Specifikacijos

Amplifier

Output: 4Ω, 70V/100V, 20W RMS, Class D design

Frequency Response: 50 Hz – 23 KHz

Signal-to-Noise Ratio: 90 dB

THD: < 0.1%

Input Impedance: 10 KΩ

Bluetooth Specification

Version: CSR 4.0

Maximum Transmission Power: Class 2, 4 dBm

Transmission Frequency: 2.4 GHz – 2.480 GHz

Transmission Range: Up to 100 feet / 30.5 meters

Receiver Sensitivity: -80 dBm @ 0.1% BER

Supported Profiles: AVCTP 1.0, AVRCP 1.0, GAVDP 1.2, AVDTP 1.0, A2DP 1.2, Hands-Free Profile (HFP) 1.5, Headset Profile (HSP) 1.1

Supported Codec: SBC, MP3, AAC, aptX

Inputs: 1 x 3-pin Euroblock input (R, G, L), up to 16 AWG

Outputs: 1 x 4-pin Euroblock output (Common, 4Ω, 70 V, 100 V), up to 16 AWG; 1 x power adapter input

General

Power: 15V DC, 2.5 A, center-positive (power adapter included)

Dimensions (W x D x H): 6.4” x 6.0” x 1.9” (163 mm x 153 mm x 48 mm)

Weight: 3.1 lbs. (1.4 kg)